Canon 4573C002 Operation Manual page 27

6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
This product is structured so that the drive unit can be separated from the lens body. If it is used as a manual
lens, detach the drive unit while referring to Section 6-1. If the drive unit is mounted again, mount it while
referring to Section 6-2.
6-1. HOW TO DETACH THE DRIVE UNIT
1
2
3
4
5
Docking screw
caution seal
E20
Turn the camera and the lens power off.
Disconnect the 12-pin cable.
Detach the lens body from the camera.
Remove the three drive unit fixing screws.
Insert the removed screws (3) into the specified
screw holes (3) shown on the following seal in the
lens body.
Docking screw caution seal