HP Pavilion S70 User Manual page 16

Connecting the Speakers
The display is designed for use with speakers
supplied with HP Pavilion computers.
To connect the speakers:
1
Identify the left and right speakers. You can tell
which side a speaker fits onto by its mounting
pegs. The side of the speaker with mounting
pegs fits against the side of the display.
2
Fit the pegs of the right speaker into the
corresponding holes on the right side of the
display, then push down until the speaker is
secure.
3
Fit the pegs of the left speaker into the
corresponding holes on the left side of the
display, then push down until the speaker is
secure.
Filename: S70naug.doc Title: S70 Monitor
Template: HP-Print.dot Author: WASSER, Inc.
Revision #: 6 Page: 13 of 28 Printed: 05/13/99 11:33 AM
To make mounting easier, angle the speaker slightly
toward the center of the display, then insert the pegs.
Refer to your computer setup poster for instructions
to connect your speakers to the PC.
Last Saved By: WASSER, Inc.
13
Connections