AEG 7000 Series User Manual page 25

9.4 AutoDose configuration
mode
Enter the AutoDose
configuration mode before
proceeding with any
programme setting. The
configuration mode may
cancel temporary settings .
1. Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in configuration mode, hold
pressed the Temperature and the
Spin buttons simultaneously for a few
seconds until the display shows the
on the left in the display and
blinking detergent tank
softener tank
right in the display.
4. Touch related tank buttons to toggle
function off and on. The display
shows OFF when a tank is disabled
or shows tank indicator when it is
enabled.
5. To set basic dosage touch related
tank buttons until default dosage
laundry product and two arrows on
bottom of display appear. Touch the
Temperature button repeatedly to
adjust the dosage upwards and the
and
indicators on the
Spin button to adjusts it downwards.
Minimum step is 1 ml.
6. After about 10 seconds the display
returns to the programme information
screen or hold pressed the
Temperature and the Spin buttons
again to exit immediately.
9.5 Filling the detergent and
additives on AutoDose
system
Please read "Detergents and
other treatments" in "Hints
and tips" chapter.
We recommend that you do
not exceed the maximum
indicated level (
1. Open the detergent dispenser.
2. Lift up the AutoDose cover lid.
ENGLISH 25
).