2.7.3
Basic operation of the operation panel
For the details of each function, refer to the Instruction Manual (Detailed).
Operation mode switchover/Frequency setting
External operation mode
Output frequency monitor (At power-ON)
∗1
Parameter clear
Group parameter setting
Hold down
The USB memory mode will appear if a USB memory device is connected. (Refer to
At power-ON)
(
PU operation mode
Value change
Output current monitor
Value change
All parameter clear
Automatic parameter setting
(Example)
Blinking
Fault record 1
The last eight fault records can be displayed.
(On the display of the last fault record (fault record 1), a decimal point LED is ON.)
When the fault history is empty,
Operation panel (FR-DU08-01)
Frequency setting written and complete!!
The present
setting displayed.
Fault history clear
IPM parameter initialization
Trace function
(Example)
Blinking
Fault record 2
is displayed.
page
51.)
INSTALLATION AND WIRING
PU Jog operation mode
Alternating
(Example)
Output voltage monitor
Alternating
(Example)
Parameter write complete!!
Parameter copy
Initial value change list
(Example)
Blinking
Fault record 8
2
49