Bosch Avantixx WVD24460GB Operating And Installation Instructions page 56

Useful tools
Dimensions
Installation surface
54
The following tools are helpful:
– Box wrench A/F 13 for removing the transportation
bolts.
– Spirit level for aligning the washer-dryer.
a = 600 mm
b = 560 mm
c = 850 mm
Weight 67 kg
Appliance stability is important so that the washer-dryer
does not "wander" during the spin cycles.
The installation surface must be solid and level. Soft
floor coverings, e. g. carpets or floor coverings with a
foam backing are not suitable.
If the washer-dryer is to be installed on a wooden floor:
If possible, install the washer-dryer in a corner.
■
Screw a water-resistant wooden board (at least 30
■
mm thick) to the floor.
Secure the washer-dryer feet with fixing brackets*.
■
If the washer-dryer is to be installed on a base:
Secure the washer-dryer feet with fixing brackets*.
■
* Holding brackets (set) can be obtained from a
specialist store or the Customer Service, order no.
WMZ 2200.