[Event] > [Audio Detection]; Abnormal Audio Input Triggered Operation Settings; Volume Detection - Canon 1064C001 Operation Manual

[Event] > [Audio Detection]

Abnormal Audio Input Triggered Operation Settings

Audio input from the microphone connected to the camera, such as loud noises or screams, or when expected audio input
ceases, can trigger operations such as video recording or e-mail notification.
Important
For notes on use of audio detection, please refer to "Precautions for Built-In Camera Functions and Included Software" (P. 9) in "Safety
Precautions".
Note
You can check the audio detection status on the [Event and Input/Output] menu of the Camera Viewer (P. 85).

Volume Detection

A volume detection event will be triggered when audio input volume is detected exceeding or falling below the reference
volume setting.
Set the conditions for triggering a volume detection event and the operations to perform according to an event.
Important
Volume detection is temporarily disabled when an event causes the playback of a sound clip or when audio is transmitted from the
Viewer.
[Volume Detection Event]
Select whether to use volume detection event.
[Detect Criteria]
Select the criteria for triggering a volume detection event.
[Reference Volume Level]
Enter the reference sound level to be used for detection.
Set the reference volume level by performing an actual test while checking [Current Volume Level] before configuring the
setting.
[Current Volume Level]
The current volume level is displayed on the status bar.
The level set in [Reference Volume Level] is indicated by a red mark. Volume below the reference level is displayed in blue,
that above the reference level is displayed in red.
[Detect Criteria Duration (sec)]
When the status meeting the volume detection criteria has continued for the specified duration or longer, an ON event is
triggered.
164
The following settings can be configured here.
• Volume Detection
• Scream Detection
R13 M50 H652 H651