1. Important • Please use approved power cord provided 1. Important by Philips at all times. If your power cord is missing, please contact your local service This electronic user’s guide is intended for center. (Please refer to Service contact anyone who uses the Philips monitor.
1. Important ness, avoid the fluorescent lighting, and unattended. Always activate a periodic surfaces that don’t reflect too much screen refresh application if your moni- light. tor will display unchanging static content. Uninterrupted display of still or static im- • Seeing a doctor if your symp-toms. ages over an extended period may cause Maintenance “burn in”, also known as “after-imaging”...
0.01 weight % for cadmium, except for the WEEE exemptions set in Schedule 2 of the Rule. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives...
Contents: User’s Manual Monitor drivers 保留备用 SmartControl software www.philips.com/welcome Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. * Audio cable * HDMI 3. Hold the monitor base stand with both...
Page 7
2. Setting up the monitor Connecting to your PC AC power input HDMI input 243V5LSB5/243V5LSW5 DVI-D input VGA input Audio input Earphone jack Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2.
Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 9
2. Setting up the monitor In the OSD shown above, you can press The OSD Menu buttons at the front bezel of the monitor Below is an overall view of the structure of to move the cursor, and press OK button to the On-Screen Display.
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand and Base This monitor is designed for optimal Remove the Base Stand performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered Before you start disassembling the monitor on at a different resolution, an alert is displayed base, please follow the instructions below to on screen: Use 1920 ×...
Page 11
2. Setting up the monitor Note This monitor accepts a 100mm × 100mm mounting interface. 100mm 100mm Caution For use only with UL Listed Wall Mount Bracket with minimum weight/load 3.5Kg...
3. Image Optimization 3. Image Optimization 3.1 SmartContrast What is it? A unique technology that dynamically analyzes displayed content and automatically optimizes an LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type TN-LCD Backlight W-LED system Panel Size 23.6" W (59.9 cm) Aspect Ratio 16:9 Pixel Pitch 0.272 × 0.272 mm SmartContrast 10,000,000:1 Optimum Resolution 1920 × 1080 @ 60Hz Viewing Angle 170°...
Page 14
CE Mark, FCC Class B, TCO Certified, ETL, ISO9241- 307, Regulatory Approvals BSMI, PSB, RCM, UKRAINIAN, EPA,KC,KCC,CECP, CCC Cabinet Color Black/White Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
No manufacturer can guarantee the types of bright dot defects. that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.
Page 18
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the monitor from mains power after you have tried these solutions, contact source immediately for safety Philips customer service representative. • Contact with Philips customer service representative immediately. Common Problems Imaging Problems No Picture (Power LED not lit) Image is not centered • Make sure the power cord is plugged into...
× 1080 @ 60 Hz. cannot be repaired. The damage mentioned above is not covered under your warranty. • Shut down your computer, disconnect your old monitor and reconnect your Philips Image appears distorted. Text is fuzzy or LCD monitor. blurred.
Page 22
PC, workstation or Mac? blunt objects. When handling the monitor, Ans.: Yes. All Philips LCD monitors are fully make sure that there is no pressure or compatible with standard PCs, Macs force applied to the panel surface side.
Page 23
7. Troubleshooting & FAQs "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.