Advertisement
Erasing Messages
You may erase messages in the following three ways:
To erase a message while it is playing
1. Press and release play/stop button.
. Press the review and skip buttons to select and play the message you want to erase.
3. Press the delete button, the current message is erased, and the next message plays.
To erase all previously played Messages in a mailbox
1. Make sure the phone is OFF (not in talk mode)
. Press and hold the delete button until "ALL OLD MESSAGES ERASED" is announced.
To erase a message from the handset :
1. Press the
flash/answerer
. Press the play/stop (key ) on the handset.
3. Press the erase (key 0) on the handset to erase a message during playback.
NOTE: Erased messages cannot be restored.
Remote Access
You may access the answering system with the cordless handset or from any tone-dial
compatible telephone.
Cordless Handset
Use the corresponding handset keys just like you would use the base buttons (see "Answering
System Setup"). The button functions are located on the handset above each number key. For
example, to play messages:
•
Press the
flash/answerer
•
Press the play/stop button to play the message.
•
When you are finished listening to your messages, press the flash/answerer button again.
Screening Calls from the Handset
Use the handset to screen calls even when you can't hear the answering system.
When the answering system picks up:
1. Press the menu OK/mute button to go to the main menu.
2.Press the vol/CID ( up or down) to scroll to Answerer MSG.
button on the handset
Press the menu OK/mute button to go to the main menu.
Press the vol/CID ( up or down) to scroll to Answerer MSG.
button. The display shows ANSWERER REMOTE ACCESS.
end button to exit
37
Advertisement
