Fig. 32: Transporting And Turning Wall Insert; Fig. 33: Removing The Diffuser - ABB HT593433 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.5 Removing the compressor casing
Transporting and turning wall insert
Fig. 32: Transporting and turning wall insert
1. Fit support angle (90025) with bolts and nuts.
2. Carefully turn wall insert over support angle (90025) and place on supports.
Place wall insert such that lifting device (90190/90195) can be removed.
u
Removing the diffuser
Fig. 33: Removing the diffuser
1. Remove and dispose of the O-ring (77040).
2. Loosen and remove screws (77015).
3. Loop lifting gear around diffuser (79000) and remove diffuser.
© Copyright 2019 ABB. All rights reserved. HZTL4033_EN Rev.D December 2019