Panasonic SF2B-H80SL Instruction Manual page 16

• The cable for series connection (SF2B-CSL□) cannot be extended.
• When the cable for series connection (SF2B-CSL□) is inserted to the main
1) Do not pull the cables before tightening the M3 screws.
2) Do not insert the connector incorrectly and tighten the M3 screws.
<Reference>
There is no difference in the cable for series connection for the emitter and the receiver.
The length of the cable for series connection differs depending on the model No.
Model No.
SF2B-CSL01
SF2B-CSL05
<Dismantling the cable for series connection>
1. For dismantling the cable for series connection, follow the above procedure of
<Constructing method for the series connection> in reverse.
- 16 -
sensor (SF2B-□) and the sub sensor (this device), take care of the following.
If inserted without care, the connector pins may bend.
Cable Length (m)
0.1
0.5
© Panasonic Industrial Devices SUNX Co., Ltd. 2021