26
Operation
To select the required input source using
the remote control, use the INPUT buttons.
To select the
Component connected to
AV IN 1/2 jack
Portable device connected
to PORT. IN jack
Component connected to
OPTICAL IN 1/2 jack
Component connected to
COAXIAL IN 1/2 jack
Component connected to
HDMI 1/2/3 jack
Built-in tuner
USB device connected to
4
USB port
3. Turn on the component and start playback.
4. To adjust the volume, rotate the MASTER
VOLUME on the front panel, or press VOL
(-/+) on remote control.
To activate the muting function
Press MUTE ( ) on the remote control.
' ' appears on the display window.
To cancel, press MUTE ( ) on the remote
control again or change the volume level.
NA9530P-FH.DZAFLLK_ENG_MFL67781456.indd 26
NA9530P-FH.DZAFLLK_ENG_MFL67781456.indd 26
Adjusting the speaker
levels
Button
AV
You can adjust the level of each speaker. These
PORTABLE
settings are applied to all sound fi elds. You can
adjust from -5 to +5 in 1 step.
OPTICAL
1. Press SPEAKER LEVEL on the remote
control repeatedly to select a desired
speaker to set.
COAXIAL
The indicator changes cyclically in the
display window as follows.
HDMI IN
SW : FL : C : FR : RR : RL
2. Press VOL (-/+) to adjust the sound level of
RADIO
the selected speaker while the indicator is
USB
displayed in the display window.
Display
SW
FL
C
FR
RR
RL
3. Repeat and adjust the sound level of the
other speakers.
Description
Subwoofer 1,2 (-5 to +5)
Front speaker (left) (-5 to 0)
Center speaker (-5 to +5)
Front speaker (right) (-5 to
0)
Rear speaker 1,2 (right) (-5
to +5)
Rear speaker 1,2 (left) (-5 to
+5)
2013-03-01
2013-03-01
9:33:29
9:33:29