Table of Contents
Advertisement
2. COLOR COPYING GUIDELINES
The HP Large Format Color Copiers allow an original image to be reproduced using a
scanner, a printer and a controller (called Touch Screen). The reproduction can be
done:
• as one step (a Copy process);
• in two steps (a Scan process followed by a Print process) with an intermediate
saving of the digitized data into a file.
In this document, we will not differentiate between the two cases: we will describe the
Scan process and the Print process separately. If you are performing a Copy, please
follow both processes consequently.
To reproduce an image accurately, the following steps should be followed:
• Checkpoints before starting a job: you should answer to these points
before starting the job;
• Touch Screen settings decisions: you should take these decisions before
setting up the Touch Screen;
• Running a job: you should configure the Touch Screen according to the
settings decided in the previous step;
• Post-job recommendations and Troubleshooting: you can make some
considerations when the job is finished and, in case the output is not as
expected, you can use this part as a guide to troubleshooting.
2.1 Checkpoints before starting a job
Before starting a color reproduction job, you should answer the following questions to
ensure you are in a correct state to proceed. If any of the answers are negative or
uncertain, please follow the recommended actions.
2
2
.
.
1
1
.
.
1
1
S
S
c
c
a
a
n
n
n
n
e
e
r
r
Is the glass plate clean and free from dust? If not, or not sure, please
follow the scanner maintenance manual to clean it. Typically, vertical lines
appear in the copy if the glass plate is not clean enough.
Color Reproduction for the HP Large Format Color Copiers family: cc800ps, 815mfp, 5500mfp and 4200 scanner
5/5
Advertisement
Table of Contents
