Table of Contents
Advertisement
Removing the appliance
Turn off the tap.
1.
→ "Emptying the water inlet hose",
2.
Page 38.
Switch off the appliance.
3.
Unplug the appliance's mains plug.
4.
Drain the remaining detergent
5.
solution.
→ "Cleaning the drain pump",
Page 35
Detach the hoses.
6.
Inserting the transit bolts
Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.
Remove the four cover caps.
1.
If necessary, use a screwdriver
‒
to remove the cover caps.
Keep the cover caps.
Insert the four sleeves.
2.
Transportation, storage and disposal en
Insert all screws into the four
3.
transit bolts and tighten slightly.
Insert the power cord into the
4.
holder
and tighten all four
screws for the transit bolts with a
WAF 13 wrench .
1
Insert the hose into holder.
5.
Using the appliance again
Remove the transit bolts
1.
→ Page 14.
2
49
Advertisement
Table of Contents
