Table of Contents
Advertisement
Inserting the battery pack
1 Slide the lock lever until the yellow
mark can be seen, then open the
cover.
2 Insert the battery pack.
Make sure the direction of the battery pack is correct,
then insert it pushing against the battery ejection lever,
until the lever locks.
3 Close the cover.
Close the cover properly, so as the yellow mark
on the lock lever is not visible.
z
To remove the battery pack
Open the cover and slide the battery ejection lever, then remove the battery pack.
z
To set Auto Power Off function
Select [A.OFF] from the [SETUP] t [CONFG] screen, then set the Auto Power Off
function. The default setting is [60sec]. Change the setting as necessary.
For details, see "Auto Power Off" (page 39).
Lock lever
Battery
ejection lever
13
GB
Continued r
Advertisement
Table of Contents
