Maintenance - Husqvarna 110iL Operator's Manual

To turn the trimmer head
The twist and edge button of the product lets the
operator turn the trimmer head. This makes it easier to
edge along walks or driveways.
(Fig. 48)
1. Push and hold the button while you turn the trimmer
head 90 degrees.
2. Release the button to lock the trimmer head in
vertical position.
To cut the lawn edge
Make sure that the grass trimmer line is vertical to the
To turn the trimmer head on page 14 .
ground. Refer to
(Fig. 49)
• Walk slowly.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
Maintenance schedule
WARNING:
you do maintenance.

Maintenance

Clean the external parts of the product with a dry cloth. Do not use water.
Examine that the start and stop button works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
Make sure that all controls work and are not damaged.
Keep the handles dry, clean and free from oil and grease.
Make sure that the cutting attachment is not damaged. Replace the cutting at-
tachment if it is damaged.
Make sure that the cutting attachment guard is not damaged. Replace the cut-
ting attachment guard if it is damaged.
Make sure that the screws and nuts are tight.
Make sure that the battery release buttons on the battery works and locks the
battery in the product.
Examine that the battery charger is not damaged and function correctly.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
14
Maintenance
Read and understand the
Remove the battery before
• Do not let the trimmer head touch the ground. The
ground and the trimmer head can become damaged.
• Use full power.
• Make sure that the cut material ejects into an area
that was cut before.
To stop the product
1. Release the power trigger and the power trigger
lockout.
2. Push the start/stop button until the green LED goes
off.
3. Push the release buttons on the battery and remove
the battery from the product. (Fig. 50)
To replace trimmer line
Refer to the last page of this operator's manual.
The following is a list of the maintenance steps that you
must do on the product. See
for more information.
Maintenance on page 14
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
1728 - 001 - 30.09.2021