DeWalt DCF887B Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Impact Driver
  5. DCF887B
  6. Manual

DeWalt DCF887B Manual

Hide thumbs Also See for DCF887B:
Table of Contents

Advertisement

Quick Links

Download this manual
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D
ANY D
e
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
WALT
e
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable,
use a ground fault circuit interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of electric shock.
1

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DCF887B

Summary of Contents for DeWalt DCF887B

  • Page 1 1) WORK AREA SAFETY Definitions: Safety Guidelines a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. The definitions below describe the level of severity for each b) Do not operate power tools in explosive atmospheres, signal word.

  • Page 2: Personal Safety

    3) PERSONAL SAFETY b) Do not use the power tool if the switch does not turn it a) Stay alert, watch what you are doing and use common on and off. Any power tool that cannot be controlled with the sense when operating a power tool.

  • Page 3: Additional Specific Safety Rules

    c) When battery pack is not in use, keep it away from other • Do not operate this tool for long periods of time. Vibration metal objects, like paper clips, coins, keys, nails, screws, caused by tool action may be harmful to your hands and arms. or other small metal objects, that can make a connection Use gloves to provide extra cushion and limit exposure by taking from one terminal to another.

  • Page 4: Important Safety Instructions For All Battery Packs

    appropriate for the dust exposure. Direct particles away from face The battery pack is not fully charged out of the carton. Before using and body. the battery pack and charger, read the safety instructions below and then follow charging procedures outlined. WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during use.

  • Page 5: Specific Safety Instructions For Lithium Ion (Li-Ion)

    The RBRC Seal terminals. For example, do not place the battery pack in aprons, ® pockets, tool boxes, product kit boxes, drawers, etc., with loose The RBRC (Rechargeable Battery Recycling Corp oration) Seal on the ® nails, screws, keys, etc. Transporting batteries can possibly nickel cadmium, nickel metal hydride or lithium-ion cause fires if the battery terminals inadvertently come in batteries (or battery packs) indicates that the costs to...
  • Page 6 NOTICE: Under certain conditions, with the charger plugged into the each individual extension contains at least the minimum wire size. power supply, the charger can be shorted by foreign material. Foreign The following table shows the correct size to use depending on cord materials of a conductive nature, such as, but not limited to, grinding length and nameplate ampere rating.

  • Page 7: Charge Indicators

    Indicator Light Operation • Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. DCB101, DCB102, DCB103 Removing the battery pack will not reduce this risk. • NEVER attempt to connect 2 chargers together. PACK CHARGING •...

  • Page 8: Wall Mounting

    HOT/COLD DELAY DCB107, DCB112, DCB113, DCB115 These chargers will not charge a faulty battery pack. The charger will DCB101, DCB102, DCB103 indicate faulty battery pack by refusing to light. These chargers have a hot/cold delay feature. When the charger NOTE: This could also mean a problem with a charger. detects a battery that is too hot or too cold, it automatically starts a delay, suspending charging.

  • Page 9: Storage Recommendations

    b. Check to see if receptacle is connected to a light switch which NOTE: Battery packs should not be stored completely depleted of turns power off when you turn out the lights; charge. The battery pack will need to be recharged before use. c.

  • Page 10: Intended Use

    COMPONENTS (Fig. 2) WARNING: To reduce the risk of serious personal injury, ensure the screw holding the belt hook is secure. WARNING: Never modify the power tool or any part of it. Damage IMPORTANT: When attaching or replacing the belt hook, use only the or personal injury could result.
  • Page 11 The worklight may come contact call 1-800-4-D WALT (1-800-433-9258) or visit our website on for a brief moment. www.dewalt.com. Proper Hand Position (Fig. 5) FUEL GAUGE BATTERY PACKS (FIG. 4) Some D...
  • Page 12 Quick-Release Chuck (Fig. 2, 6, 7) application. The more you squeeze the trigger, the faster the tool will operate. For maximum tool life, use variable speed only for starting WARNING: Use only impact accessories. Non-impact accessories holes or fasteners. may break and cause a hazardous condition. Inspect accessory prior NOTE: Continuous use in variable speed range is not recommended.

  • Page 13: Maintenance

    mode will work as a screwdriver in light applications, before hesitating CAUTION: Ensure fastener and/or system will withstand the level of as the screw head reaches the work piece, and then (if required) start torque generated by the tool. Excessive torque may cause breakage a slow controlled impact to ensure the head ends perfectly flush.

  • Page 14: Register Online

    Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286, call visit www.dewalt.com or call 1-800-4-D WALT (1-800-433-9258). 1-800-4-D WALT (1-800-433-9258) or visit our website: www.dewalt. This warranty does not apply to accessories or damage caused where com. repairs have been made or attempted by others. This warranty gives WARNING: Use only impact accessories.

  • Page 15: 90 Day Money Back Guarantee

    In addition to the warranty, D WALT tools are covered by our: LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country 1 YEAR FREE SERVICE specific warranty information contained in the packaging, call the local WALT will maintain the tool and replace worn parts caused by company or see website for warranty information.

This manual is also suitable for:

Dcf887d2

Table of Contents