Tables - ABB HT608785 Operation Manual

Operation Manual / A170-M.. - A175-M..

Tables

Tables
Table 1: Definition of pictograms ............................... 9
Table 2: Personal protective equipment to be worn
at all times ...................................................................... 13
Table 3: Personal protective equipment to be worn
specific to the respective task ................................... 13
Table 4: Weight of complete turbocharger unit .... 28
Table 5: Foot screws, dimension and strength class..
34
Table 6: Foot screws, dimension CE......................... 34
Table 7: Foot screws, dimension TE ......................... 34
Table 8: Foot screws, number of cup springs ........ 34
Table 9: Torque-controlled tightening of the pres-
sure screws .................................................................... 37
Table 10: Oil pressure range........................................ 41
Table 11: Oil temperature at the inlet ....................... 42
Table 12: Oil temperature at the outlet.................... 42
Table 13: Expected replacement intervals............... 52
Table 14: Recommended replacement intervals .... 52
Table 15: Tightening torque (81272) ......................... 56
Table 16: Tightening torque (81273) ......................... 56
Table 17: Compressor cleaning parameters ........... 59
Table 18: Compressor cleaning parameters ........... 62
Table 19: Cleaning parameters Wet cleaning of tur-
bine and nozzle ring..................................................... 68
Table 20: Malfunctions when starting - Delayed
start-up .......................................................................... 69
Table 21: Malfunctions when starting - Vibrations 69
Table 22: Malfunctions when starting - Rubbing of
rotating parts................................................................ 69
Table 23: Malfunctions during operation - Lubricat-
ing oil pressure too low............................................... 70
Table 24: Malfunctions during operation - Drop in
speed .............................................................................. 70
Table 25: Malfunctions during operation - Speed in-
creases ........................................................................... 70
Table 26: Malfunctions during operation - Exhaust
gas temperature too high ........................................... 71
© Copyright 2021 ABB. All rights reserved.
Table 27: Malfunctions during operation - Charge air
pressure too low ............................................................. 71
Table 28: Malfunctions during operation - Charge air
pressure too high .......................................................... 72
Table 29: Surging of the turbocharger ...................... 72
Table 30: Malfunctions when stopping - Runout
noises ............................................................................... 73
Table 31: Malfunctions when stopping - Shortened
runout time ..................................................................... 73
Table 32: Malfunction, No speed measurement sig-
nal or poor signal amplitude ....................................... 74
Table 33: Malfunction, Measured speed too high ... 74
Table 34: Malfunction, Measured speed too low .... 74
Table 35: Assembly weights ........................................ 77
Table 36: Axial clearance A ........................................... 80
Table 37: Tightening torque (56014) ......................... 94
Table 38: Tightening torque (57005) ......................... 95
Table 39: Tightening torque (61069) ......................... 97
Table 40: Tightening torque (61059 / 42128) .......... 99
Table 41: Tightening torque (86505) ....................... 100
Table 42: Inner thread size (25008).......................... 101
Table 43: Tightening torque (25013)........................ 102
Table 44: Tightening torque (61037) ....................... 103
Table 45: Tightening torque, nuts that are difficult
to access (61037) ......................................................... 103
Table 46: Tightening torque (61090)....................... 103
Table 47: Tightening torque (77015)........................ 104
Table 48: Tightening torque (72011) ........................ 106
Table 49: Axial clearance A......................................... 107
Table 50: Tightening torque (72027) ....................... 108
Table 51: Tightening torque (72027) ........................ 109
Table 52: Tightening torque (56014) ........................ 114
Table 53: Tightening torque (61009) ........................ 114
Table 54: Tightening torques..................................... 116
Table 55: Tightening torques 61009......................... 117
Table 56: Locking device tightening torque........... 120
HZTL4033_EN Revision I November 2021