Table of Contents
Advertisement
The product volume
is low
The product fails
to recognise a USB
storage device
A Bluetooth device
cannot be paired
LG WOWCAST
does not work
properly
60
• Check the following and change the settings accordingly.
- Run the LG Sound Bar app, tap the Settings
change the [DRC] function to [Off] on the [Sound Settings] menu.
- When the product is connected to a TV, press the Settings button on the TV
remote control, select the [Speaker] menu, and change the [Digital Sound Output]
setting from [PCM] to [AUTO] or [BITSTREAM].
- If the product is connected to a playback device such as a DVD player or Blu-ray
disc player, go to the connected device's Settings menu. Change the [Digital Sound
Output] setting from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM]. Set
the [DRC] of the connected device to [OFF].
- If the product's Night Time mode is on, turn it off by pressing the Settings
button and Left/Right and then Up/Down.
• The product may not support the file format of the USB storage device. Format the
USB storage device and reconnect it. When formatting, refer to the USB storage
device formats supported by the product and select an appropriate file format. ([
See "Connecting to a USB Storage Device" on page 45.)
• Press the Settings button on the Bluetooth device and check whether the
Bluetooth function is enabled. If Bluetooth is enabled, turn it off and on, then try
again.
• Remove any obstacles between the product and the Bluetooth device.
• Bluetooth pairing (connection) may not work properly depending on the Bluetooth
device type or the surrounding environment.
• Check if the TV is properly connected to the LG WOWCAST with a cable.
• Check if the TV sound output is set to [HDMI ARC].
• Reset the LG WOWCAST and connect it again. ([ See "Connecting with the LG
WOWCAST" on page 31.)
button on the first screen, and
Advertisement
Table of Contents
