Removing And Installing Cowlings And Panels - Yamaha Xmax 250 Owner's Manual

Removing and installing
cowlings and panels
The cowlings and panels shown need
to be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each
time a cowling or panel needs to be
removed and installed.
Cowling A
To remove the cowling
1
1. Screws
1. Remove the cowling bolts.
2. Disconnect the turn signal light
lead connectors, and then take
the cowling off.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU18712 To install the cowling
1. Connect the turn signal light lead
connectors.
2. Place the cowling in the original
position.
3. Install the cowling bolts.
Cowling B
To remove the cowling
EAU18900
1
Screws
Remove the screws, and then take
the cowling off.
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
Panel A
To remove the panel
1. Open the front storage compart-
EAU18790
Screws
2. Remove the screw, and then take
To install the panel
1. Place the panel in the original
2. Close the front storage compart-
6-6
ment. (See page 3-14.)
the panel off.
position, and then install the
screw.
ment.
EAUM1250
6