Connecting to Access Points in the List
•
Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 4 to manually set an access point.
Follow on-screen instructions and enter an SSID, security settings, and an
encryption key.
•
[***] is displayed for the encryption key in step 5 when the same access point
is used to connect to another device.
•
To add multiple computers, repeat the above procedures starting from step 1.
4
Choose an access point.
Touch an access point.
●
●
5
Enter an encryption key.
Touch inside the frame and a keyboard
●
●
will be displayed. Enter the encryption
key and touch [Next].
6
Choose [Auto].
Touch [Auto].
●
●
A list of other connected devices
▶
●
connected to the access point will appear
in the [Select a Device] screen.
Choose the computer to connect to,
●
●
following steps 8 – 9 on p. w-34. The
computer is now added to the list.
Adding a Computer
w-35