3
Remove the Print Head from
the silver package.
•
There may be some transparent or light blue ink on the inside of the bag the Print
Head comes in, or the inside of the protective cap - this has no effect on print quality.
Be careful not to get ink on yourself when handling these items. Be careful not to
stain your hands.
4
Remove and discard the orange protective
cap.
5
Tilt the Print Head and set it in place. Lower the Print Head Lock
Lever (E) completely.
•
Do not knock the Print Head against the sides of the Holder.
•
Be sure to install it in a well-lit environment.
•
Pinch the Print Head Lock Lever firmly and lower it gently.
•
Once you have installed the Print Head, do not remove it unnecessarily.
(E)