Using Conversion Lenses (Sold Separately) - Canon PowerShot S80 User Guide Advanced User Manual

Using Conversion Lenses (Sold Separately)

The camera supports use of the separately sold Wideconverter WC-DC10
and Tele-converter TC-DC10. In order to attach this lens, you also need to
use the separately sold Conversion Lens Adapter LA-DC20.
Warning
When attaching the wide converter or tele-converter be sure to screw it on
securely. If they come loose, they may fall from the lens adapter, posing
risk of injury from shattered glass.
Never look into the sun or into strong light through the wide converter or
teleconverter as this can result in blindness or impairment of vision.
The built-in flash cannot be used with a conversion lens attached.
When using the tele-converter, set the camera near the maximum
telephoto. At other zoom settings, the image will appear as if its
corners have been cut off.
Filters and lens hoods cannot be attached to the wide converter and
tele-converter lens.
You cannot use the viewfinder when the conversion lens adapter is
attached.
Attaching a Lens
1
Open the lens cover to power up the camera.
2
Align the conversion lens
adapter with the front of the
camera, then attach the
conversion lens adapter to the
tripod screw hole.
a
c
b
11
131