Canon PIXMA MX340 Series Getting Started page 46

8
Press and hold the WPS button on the access
point (for about 5 seconds), then press the OK
button on the machine within 2 minutes.
For details on the WPS button pressing, refer to the
manual of your access point.
The Connected screen is displayed.
The Wi-Fi lamp (blue) flashes while searching for or
connecting to an access point.

10 Set Up a Wireless Connection
9
Press the OK button.
The LAN settings screen is displayed.
• If the timeout error screen appears, press the OK
button, then start over from .
• If another error appears, refer to the printed
manual: Network Setup Troubleshooting.
10
D
Press the COPY button (D).
The copy standby screen is displayed.
Next, read "Install the Software (3)"
on page 51!