Table of Contents
Advertisement
5
Press on the lever to remove the connector cover on the back of the
printer.
Note
z Store the connector cover in a safe place. The connector cover must be re-attached
after the LAN cable is disconnected or before moving the printer.
6
Connect the LAN cable to the LAN port of the printer then connect it
to the HUB port.
Press in until you hear a click.
Important
z If the printer is connected to a network, after you switch the printer on, you must
check the LNK lamp and confirm that it is lit. For details, please refer to "Connect
the Power Cord". (Æ P.1-10)
Installing a Windows TCP/IP Network Connection
3-7
Advertisement
Table of Contents
