Canon imageCLASS MF4570dw Starter Manual page 17

1 2
Preface Installing the Machine
2.
Set the fax receive mode.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, the machine will be set to one of the following four operation modes.
<Auto><Fax/Tel Auto Switch><Answer><Manual>
Do you want to use
this machine for fax
only (no telephone)?
Yes
No
No
Do you want to auto-
receive faxes and
answer phone manually?
Yes
No
No
Do you want to use
an answering machine
to answer the phone?
Yes
No
No
<Manual> mode is set.
→ Proceed to Step 3.
•
Responds to both a telephone call and fax with handset
pickup.
•
Rings when receiving a call or fax.
3
Configuring and Connecting the Fax
•
Receives a fax automatically.
•
Does not use the telephone.*
Yes
* If connecting with the telephone in auto receive mode, the telephone
rings when receiving a fax or telephone call. You can answer the
telephone while the telephone is ringing. To configure so that the
telephone does not ring, see "Incoming Ring" in the
•
Yes Receives a fax automatically.*
•
Responds to a telephone call by picking up the handset.
* An incoming call rings. To configure so that the incoming call does not
ring, see "Incoming Ring" in the
Yes
•
Receives a fax automatically.
•
Responds to a telephone call with the built-in answering machine.
•
Rings when receiving a call or fax.
4
Connecting to a Computer and
Installing the Drivers
<Auto> mode is set.
→ Proceed to Step 3.
<Fax/Tel Auto Switch> mode is set.
→ Proceed to Step 3.
e-Manual.
<Answer> mode is set.
→ Proceed to Step 3.
Appendix
e-Manual.
15