Canon ColorPASS-Z5000 Printing Manual page 31

1
1-17 Printing from applications
In the
Page Size
From the
Paper Source
example, you can specify that the job should be printed on pages from Drawer 1.
In the
Media Type
From the
Transparency Interleaving
Printed Interleave sheet between print job copies.
For more information on these and other print options, see Appendix A.
If paper loaded in the selected drawer is a different size, orientation, and/or
N :
OTE
media type than that of the job you are sending, the ColorPASS displays an error
message and the job might not print. You should then load the correct paper in the
selected drawer or cancel the job. One exception is that when the Paper Source option
is set to SB-Size Set at Copier, no error message is displayed. Be sure to load the
appropriate paper in the SB (Stack Bypass) tray and select the correct paper size from
the copier's touch panel display.
5. Click the Destination, Layout, ColorWise, Image Quality, Finishing, and FreeForm print
option bars to specify the appropriate settings for the print job.
These print options are specific to the ColorPASS and the copier. They override
settings specified in ColorPASS Printer Setup, but can be overridden from Command
WorkStation using the job's Properties dialog box, or from Fiery WebSpooler or
Fiery Spooler using the job's Override Print Settings dialog box. For information about
these options and overrides, see Appendix A.
Some options listed in the printer driver could also be set from an application
N :
OTE
(for example, collation). In these cases, use the driver option to perform the function,
rather than setting it from the application. The application may not set up the file
properly for printing on the ColorPASS and may also take longer to process.
If you specify incompatible print settings, the Conflict dialog box may appear.
N :
OTE
Follow the on-screen instructions to resolve the conflict.
area, specify the page size for the job.
pop-up menu, choose the paper drawer for the job. For
area, specify the type of media to use for the job.
menu, specify whether or not to print a Blank or