#
IMPORTANT
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit
mark ( ) at the back of the paper drawer.
#
NOTE
•
The right and left paper drawers hold approximately 1250 sheets (64 g/m² / 17
lb bond) or 1100 sheets (80 g/m² / 20 lb bond).
•
Paper drawers 3 and 4 hold approximately 680 sheets (64 g/m² / 17 lb bond) or
550 sheets (80 g/m² / 20 lb bond).
•
If there are instructions on the package of paper about which side of the paper to
load, follow those instructions.
•
When paper is loaded into the paper drawer, the side facing down is the one
printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper
stack over, and reload it.
Gently push the paper tray back into the printer until it clicks into place in the closed
5.
position.
Load the media into the integrated paper trays
Chapter 9 - Paper, toner, and staples
241