HP Compaq Presario,Presario 8380 Supplementary Manual page 63

Main Set up and modify basic options such as time,
date, disk drives, and hard drives. Check the
amount of system memory and extended
memory here.
Advanced Modify advanced features such as Plug and Play
and memory settings. Configure your peripherals
and check your CPU type and speed here.
Power Enable power-saving mode and specify auto
suspend settings.
Specify the sequence in which the system boots:
Boot
disk drive, hard drive, CD-ROM drive.
Exit Save or discard changes.
Use the left arrow and right arrow keys to make a
selection, and then press the Enter key.
For a more detailed explanation, see the online
System Guide available on the HP At Home Web site
(http://www.hp-at-home.com).
Note:
We recommend that you keep a written copy of your
settings and keep it up to date.
Setting Auto Suspend in the BIOS
With the Auto Suspend feature enabled, the computer
will automatically go into Suspend mode after a long
period of inactivity and will resuspend itself after it is
awakened by an application.
Note:
Some third-party software and hardware may
experience problems with Suspend mode.
To enable/disable the Auto Suspend feature:
1
Reboot your computer by shutting down and
restarting it.
2
When you see a blue screen with an HP logo,
press the F1 key on the keyboard; this starts the
BIOS Setup program.
3
Press to go to the Power menu.
4
In the Power Savings category, press Enter.
Chapter 3 Upgrading and Servicing Your Computer
59