Sealey APMS22 Assembly Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMP P OR R TA TANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
TH H E P P RO O DUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PE E RS S ON N AL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
 WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this
bench.
 Locate the bench in a suitable work area.
 Keep the work area clean, uncluttered and ensure there is adequate lighting.
 WARNING! Use the bench on level and solid ground, preferably concrete.
 Keep the bench clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the work area.
DO NOT use the bench for any purpose other than which it is designed.

 DO NOT undertake work on the bench without the workpiece being adequately secured.
 DO NOT use the bench outdoors.
 DO NOT get the bench wet or use in damp or wet locations or areas where there is condensation.
 DO NOT clean the bench with any solvents which may damage the surface or the protective coating on the worktop.
2. INTRODUCTION
Manufactured from heavy gauge powder-coated steel and is at the top end of our range with a weight capacity of 1000kg (evenly distributed).
Adjustable leg extensions allow worktop height to range from 680 to 1030mm. Fitted with adjustable feet to ensure work surface is level,
even if your fl oor is not. Durable 32mm thick solid wood worktop (APMS22), stainless steel worktop (APMS23).
3. SPECIFICATION
Model No: ................................................ APMS22, APMS23
Size (W x D x H): ...................... 1830 x 610 x (680-1030)mm
Work top:
APMS22 ................................................................Solid wood
APMS23 .......................................................... Stainless steel
4. CONTENTS
ITEM DESCRIPTION
1 Back stiffener
2 M6 x 16 Hex socket head screw
3 Solid wood top
3A Stainless steel top
4 Upper supporting frame
5 M8 Flat washer
6 M8 x 85 hex bolt
7 Bottom support frame
8 Adjustable foot
9 M8 hex nut
10 Front stiffener
© Jack Sealey Limited
1830MM HEAVY-DUTY STEEL ADJUSTABLE
WORKBENCH WITH WOODEN OR STAINLESS
STEEL WORKTOP
APMS22, APMS23
MODEL NO:
QTY
2
30
1
1
2
16
8
2
4
8
1
fi g.1
Original Language Version APMS22, APMS23 Issue 1 09/08/21