Download Print this page

Sealey G1000E Instructions page 4

Inverter generator 1000w

Advertisement

5. TRANSPORTATION AND STORAGE
WARNING! Petrol is highly flammable and petrol vapour is explosive. Do not permit smoking, naked flames, sparks or heat in
p
the vicinity while handling petrol. Avoid spilling petrol onto a hot engine. Comply with all laws regulating storage and handling
p
of fuels.
5.1
TRANSPORTATION
5.1.1 Do not overfill the tank.
5.2.2 Do not operate the generator while it is on a vehicle. Remove it from the vehicle and and operate it in a well-ventilated place.
5.2.3 To prevent a fuel spillage during transportation, it should be secured in its normal, upright position with the engine switched OFF.
5.2.4 Turn the cap filler lever fully counterclockwise to the OFF position.
5.2
STORAGE
5.2.1 Prior to storing the generator for a prolonged period, ensure that the storage area is free of excessive humidity and dust.
5.2.2 Completely drain the fuel tank.
6. TROUBLESHOOTING
PROBLEM
Engine will not start.
Engine does not run
smoothly.
7. DECLARATION OF CONFORMITY
Declaration of Conformity
GENERATOR 1000W 230V
Model: G1000E
98/37/EC Machinery Directive
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
CAUSE
Fuel tap not turned on.
No fuel in tank.
Oil not filled to correct level.
Engine run switch not turned on.
Choke not set correctly.
Spark plug fouled.
Air cleaner blocked.
Air cleaner blocked.
Spark plug fouled.
Choke set incorrectly.
Dirty/stale fuel.
We, the sole importer into the UK, declare that the product listed here is in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a national authority, upon
request to Jack Sealey Ltd.
Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk.
01284 703534
ACTION
Turn fuel on.
Fill fuel tank.
Fill oil to correct to level.
Set engine control correctly.
Set engine control correctly.
Clean/replace spark plug.
Clean/replace air filter.
Clean/replace air filter.
Clean/replace spark plug.
Set engine control correctly.
Drain and replace fuel.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
www.sealey.co.uk
Web
17th January 2006
sales@sealey.co.uk
email
G1000E - 1 - 170106

Advertisement

loading