HP Pavilion 754 Support Manual page 15

Pavilion home pc
Hide thumbs Also See for Pavilion 754:
Table of Contents

Advertisement

Automatic Multiple Dialing Attempts
Most communication software can be configured to make automatic dialing
attempts to a telephone number that is busy or not answering (automatic redial
function). The maximum number of all attempts that can be made in one sequence
must not exceed the numbers shown in the following table. If your program makes
continuous automatic dialing attempts or more than the number in the table, and it
cannot be changed, an alternative program must be used or automatic dialing
disabled. There is no limit for manually initiated dialing attempts.
Country/
Number of attempts
region
per sequence
Australia
10
New Zealand
10
Bell Compatible Operation
Bell compatible mode should not be used. Nearly all modems use CCITT mode
because Bell mode is limited to a maximum speed of 300 or 1200 BPS, and some
network interference problems may arise due to line signaling requirements.
Parallel Telephones
If you find that you regularly experience line noise or other interference when
using your modem, we suggest disconnecting other telephones from the line. Some
telephones may place a load across the telephone line when not in use, which
adversely affects the performance of your modem.
If disconnecting parallel telephones reduces the interference, then it may be
necessary to have the telephone(s) repaired or replaced.
Warning: (New Zealand users only) Please note that
operation of this modem on the same line as telephones or
other equipment with audible ringing devices, or automatic
ringing detectors, may cause "bell tinkle" or false tripping of
the ringing detector.
If this occurs, do not contact Telecom Faults Service. Also,
please note that the power consumed from the telephone line
by this modem may not provide for the effective transfer of a
call to or from other equipment connected to the same line.
Connecting to Other Equipment
There are two telephone line sockets in your modem, marked LINE and PHONE.
The telephone line is connected to the LINE socket, and other equipment, such as
the telephone, is connected to the PHONE socket. Please note that Austel
permitted/NZ Telepermitted equipment only may be connected to the PHONE
socket.
Filename: sa37012.doc
Title: HP-Print2k.dot
Template: HP-Print2K_vertical.dot
Revision #: 53
Page: 15 of 20
Pauses between
Pauses between
attempts (seconds)
sequences (minutes)
3
30
60
60
Author: davidg
Last Saved By: kimt
Printed: 10/17/02 10:05 AM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents