Page 2
Your new washing machine Note/tip Information about the optimum use of You have chosen a Siemens washing the appliance/any other useful machine. information. Please take a few minutes to read and 1. 2. 3. / a) b) c) become familiar with the advantages of your washing machine.
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions.
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. The following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate.
Page 8
Safety instructions If you take hold of any of the Warning ■ appliance's protruding parts Risk of electric shock/fire/ (e.g. the appliance door) in material damage/damage to order to lift or move it, these the appliance! parts may break off and If the appliance's mains cable is cause injury.
Page 9
Safety instructions The appliance is secured for Caution! ■ transportation by transport Material damage/damage to locking devices. If the the appliance transport locking devices are If the water pressure is too ■ not removed before the high or too low, the appliance is operated, this appliance may not be able to may result in damage to the...
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g.
Safety instructions Caution! Cleaning/Maintenance Material damage/damage to Warning the appliance Risk of death! If the amount of laundry in ■ The appliance is powered by the appliance exceeds its electricity. There is a risk of maximum load capacity, it electric shock if you come into may not be able to operate contact with live components.
Page 12
Safety instructions Warning Caution! Risk of poisoning! Material damage/damage to the appliance Poisonous fumes may be given off by cleaning agents that Cleaning agents and agents for contain solvents, e.g. cleaning pretreating laundry (e.g. stain solvent. removers, prewash sprays, etc.) Do not use cleaning agents that may cause damage if they contain solvents.
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 27 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more display segments are Dispose of packaging in an visible, the higher the respective...
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:...
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine.
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13).
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose ■...
Positioning and connecting Water inlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Danger of death! Maximum 1000 kPa (10 bar) There is a risk of electric shock if you When the tap is open, the water flow touch live components.
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
Positioning and connecting Levelling Observe the following information and ensure that: Align the appliance using a spirit level. Notes Incorrect alignment may result in loud The mains voltage and voltage ■ noises, vibrations and machine indicated on the washing machine "movement".
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■...
Positioning and connecting Transportation Fitting the transportation securing means: E.g. when moving house Remove the covers and keep them in a safe place. Caution! If required, use a screwdriver. Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can prevent the appliance from working correctly, e.g.
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door.
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Service flap Detergent drawer with illuminated displays for the i-Dos dispenser on the drawer handle ~ Page 46...
Getting to know the appliance Control panel All the buttons are sensitive Buttons Appliance settings Note: (except for the main switch) and only (á 3 sec.) for changing the need to be pressed lightly. appliance settings, e.g. button signals, an overview of all selectable Main switch To switch the appliance on/off: settings that can be selected...
Page 26
Getting to know the appliance The Remote start } button releases the appliance so that the programme can be started remotely via the Home Connect app. Remote start remains enabled for 24 hours after it has been activated. It is automatically deactivated if you do not start the programme via the Home Connect app during this...
Getting to know the appliance Display panel Main menu after selecting the programme e.g. Easy-Care The arrows on the display panel indicate in which direction the programme default settings can be changed using the buttons located above and below. To change, select the button under the programme highlighted in black and change the programme.
Page 28
Getting to know the appliance Options (×) button selected and select, for example, the Rinse Hold ($) option: Using the buttons under the two left- hand arrows, select the option. Using the two right-hand arrows, select the displayed value. The selected options are active immediately and are displayed on the display panel.
Laundry Some examples of soiling levels can Laundry be found on ~ Page 30 – Light: Do not prewash, select the P repare the laundry speedPerfect ( setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/instructions Settings Name of the programme Max. load Brief explanation of the programme and the fabrics for which it is Temperature that can be selected;...
Page 32
Overview of programmes Programme/type of laundry/instructions Settings Easy-Care Max. 4 kg Textiles made of synthetic materials or blended fabrics ¯ - 60 °C 0-1200** rpm ¦, (, ã, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Max.
Page 33
Overview of programmes Programme/type of laundry/instructions Settings Super 15’/30’ * Max. 2 / 3,5 kg Extra-short programme of approx. 15 / 30 minutes, suitable for ¯ - 40 °C small items of lightly soiled laundry 0-1200** rpm The Super 15’ programme is run for the speedPerfect ( Note: .
Page 34
Overview of programmes Programme/type of laundry/instructions Settings Shirts / Business Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or ¯ - 60 °C blended fabrics 0-800** rpm Notes ¦, (, ã, !, l, Ã, æ, õ, Shirts/blouses are only given a short spin on the ■...
Page 35
Overview of programmes Programme/type of laundry/instructions Settings Rinse * Rinse Plus with spin 0-1600** rpm Ã, l, $, æ Detergent -, fabric softener è Spin * Extra spin with selectable speed 0-1600** rpm æ Detergent -, fabric softener - Drain * For the rinsing water, e.g.
Overview of programmes Programme/type of laundry/instructions Settings Sport * Max. 2 kg Sportswear and leisurewear made from microfibre fabrics ¯-40 °C Notes 0-800** rpm Laundry must not be treated with fabric softener. ■ ¦, (, ã, !, l, Ã, æ, õ, Before washing, clean the detergent drawer thoroughly (manual ■...
Programme default settings Ready in Programme default settings The programme duration is shown after selecting the programme. The programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the main menu after Before starting the programme, you selecting the programme.
Additional programme settings/options Prewash * Additional programme settings/options Settings that can be selected: (* depending on the on – off model) For heavily soiled laundry. The settings/options that are available Notes A d d i t i o n a l p r o g r a m m e s e t t i n g s / o p t i o n s depend on the model.
Additional programme settings/options Less ironing * Rinse Hold * (æ) Settings that can be selected: Settings that can be selected: on – off on – off Reduces creasing thanks to a special The washing remains in the water after spin sequence followed by fluffing and the last rinse cycle.
Additional programme settings/options Stains * The treatment of two stains explained in the following example: Blood In total, there are 16 different types of Blood is first “dissolved” in cold water, stain to choose from. then the selected wash programme starts.
Press the # button. The appliance is settings for each washing cycle. switched on. To do this, repeatedly press the The Siemens logo appears on the corresponding button until the required display and all indicator lamps light up. setting is displayed. ~ Page 37 The Cottons programme set at the factory is then always displayed.
Additional programme settings/options load. ~ Page 39 Wait until the Siemens logo no ■ longer appears before adding Placing laundry into the drum laundry. The load screen appears when the ■...
Operating the appliance Start the programme Note: Foam detection If Foam has been detected also Make sure that no items of laundry are appears on the display panel, the trapped between the door and the washing machine has detected too rubber seal, and close the door.
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the Ü button. To cool down laundry: Select Rinse. Press the Ü button to do this. Press the Ü...
Intelligent dosing system Removing laundry/switching Intelligent dosing off the appliance system Open the loading door and remove Intelligent dosing system in the laundry. Follow the information I n t e l l i g e n t d o s i n g s y s t e m on the display panel.
Intelligent dosing system Initial use/filling the Filling the dispensers: dispensers The dispensers in the detergent drawer are marked using corresponding Refer to the manufacturer's instructions dispenser covers: when choosing your detergent and fabric softener. We recommend the use ß Standard/universal detergent ■...
Intelligent dosing system Everyday use Depending on the programme, Note: the selection (on/off) as well as the relevant dosage strength that has been Illuminated displays on the drawer selected for i-Dos iIô and i-Dos ô are handle: saved until they are changed, even when the machine is switched off.
Page 49
Intelligent dosing system My water hardness: Notes Reduce the basic dosage if using a ■ very concentrated detergent. If large amounts of foam are ■ repeatedly created during washing, please check your basic dosage and dosage quantity settings. Certain types of liquid detergent can also create excessive amounts of Below is an example of detergent foam.
Intelligent dosing system Dispenser content for Manual dosage i-Dos iIô In addition to intelligent dosing, you can manually add cleaning aids (e.g. Instead of fabric softener, a second softener, bleach or stain remover) to liquid detergent can be used in the compartment À...
Page 51
Intelligent dosing system Notes When dosing all detergents, ■ cleaning aids and cleaning agents, always follow the manufacturer's instructions. If dosing detergent manually, do not ■ add additional detergent to the intelligent dosing dispenser (set intelligent dosing to ö (off)). This will prevent overdosing and foaming Dilute viscous fabric softener and ■...
Home Connect You cannot use the ■ Home Connect Home Connect app to make changes while the appliance is in T his appliance is Wi-Fi enabled and can operation. You will be able to use the H o m e C o n n e c t be controlled remotely via a smartphone Home Connect app to see any or tablet PC.
Home Connect Connecting to your home If you were not able to establish Note: a connection, check whether your network automatically appliance is within range of the home network and repeat the manual If your router has a WPS function, you connection.
Home Connect Connecting to your home network manually If you have already automatically connected your appliance to your home network, you can skip the manual connection step and connect it to the Home Connect app ~ Page 55. If your router does not have a WPS function, you will need to connect the appliance to your home network The appliance will now set up its...
Home Connect Connecting to the Home If your smartphone or Note: tablet PC is still connected to the Connect app HomeConnect network, you will need to connect it to your home If your appliance is connected to your network first. home network, you can connect it to the If your appliance is not shown Home Connect app.
Home Connect Activating or deactivating Notes If Wi-Fi is switched off on your Wi-Fi ■ appliance, you will no longer be able to connect it to your home network You can switch the Home Connect or to the app. function on your appliance on or off If you have switched Wi-Fi on, the permanently at any time.
Home Connect Resetting your network If you want to operate the Note: appliance via the Home Connect app settings again, you must reconnect it to your home network and to the You can clear the network settings and Home Connect app either automatically break the connection to your or manually.
Home Connect Updating the software If no software update is available, Note: Not available appears in the display You can update the panel. The Home Connect software is Home Connect software on your completely up-to-date. appliance. As soon as a new update is available, a note appears in the display panel for your appliance.
Home Connect functionality meets the basic requirements and other relevant provisions of the Directive 1999/5/EC. A detailed R&TTE Declaration of Conformity can be found online at www.siemens-home.bsh-group.com among the additional documents on the product page for your appliance.
Appliance settings Set the basic dosage in accordance Appliance settings with the recommendation of the detergent manufacturer. You can change the following appliance A p p l i a n c e s e t t i n g s settings: To change the settings, press and hold both Appliance settings buttons for...
Sensors Dosing recommendation Sensors The dosing recommendation indicates a A utomatic load sensing recommended detergent dosage as a S e n s o r s percentage, depending on the selected Depending on the type of fabric and programme and the detected load. The load, the automatic load sensing indicated % refers to the dosing function optimally adjusts the water...
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■...
Cleaning and maintenance i-Dos detergent draw and its Cleaning the dispensers/detergent drawer: housing The detergent drawer can be removed completely to allow you to Emptying the dispensers: clean to dispensers after you have The dispensers have emptying emptied them. outlets with removable sealing plugs a) Empty the dispensers before at the front.
Cleaning and maintenance The drain pump is blocked, emergency draining Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into – Protect the rear drawer connector contact with the hot water, you may be against water, detergent or fabric- scalded.
Cleaning and maintenance Filter in the water supply blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Put the service flap back on, lock it Press the Ü button. Allow the into place and close it.
Faults and what to do about them. Information on the display panel Display Cause/remedy Top up the The i-Dos dispensers are below the minimum fill level; top up ~ Page 47. i-Dos iIô , ô container i-Dos iIô, i-Dos ô Set i-Dos iIô...
Faults and what to do about them. Display Cause/remedy Drum care This instruction reminds you to run the Drum clean 90 °C programme or a 60 °C information: programme to clean and care for the drum and the outer tub. Notes Run the programme without laundry.
Page 69
Faults and what to do about them. Faults Cause/remedy The drum briefly jerks or Not a fault – the internal motor test may cause the drum to jerk or judder briefly judders after the when the wash programme starts. programme has started. The water is not draining.
After-sales service Faults Cause/remedy Home Connect is not You can find solutions to problems with Home Connect at www.home- ■ working. connect.com. The availability of the Home Connect functionality depends on the ■ availability of the Home Connect Services in your country. Home Connect Services are not available in every country - for further information please check: www.home-connect.com.
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*...
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for cottons in accordance with Regulation (EU) no. 1015/2010 Programme + temperature Load Approximate programme...
Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
Page 76
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001269135* 9001269135 (9612)