Pioneer AVH-P6500DVD UC Service Manual page 169

5
- Removing the Case (Fig.5)
1
Remove the two screws and then remove
the Holder.
2
Remove the screw.
3
Remove the five screws and then remove
the Case.
-
Removing the Display Assy (Fig.6)
1
Remove the screw.
Disconnect the connector and then remove
the Motor Unit.
2
Remove the two screws and then remove
the two Holders.
3
Pull out the Display Assy in the arrow
indicated direction.
Note) When reassembling, hold the switch down
with tweezers or the like and put the Display Assy
back to the Chassis. Otherwise, the switch may be
damaged and not function properly.
-
Removing the Main Unit (Fig.7)
1
Remove the screw and then remove
the Bracket.
2
Remove the four screws and then
remove the Shaft Unit.
3
Remove the three screws.
Disconnect the connector and then remove
the Main Unit.
5
6
3
3
2
2
Holder
Bracket
2
3
2 1
AVH-P6500DVD/UC
6
7
1
1
3
Case
Holder
Motor Unit
1
3
Display Assy
Shaft Unit
3
3
Main Unit
7
8
A
3
3
B
Fig.5
Switch
C
D
2
Holder
Fig.6
2
E
2
Fig.7
F
169
8