Related Manuals for Siemens WD14H490AU
Summary of Contents for Siemens WD14H490AU
- Page 1 Washer dryer WD14H490AU siemens-home.bsh-group.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Customer service ... 35 Intended use Technical specifications ..35 For private domestic use only. ■ I n t e n d e d u s e The washer dryer is suitable for ■... -
Page 5: Safety Instructions
Safety instructions Warning Safety instructions Risk of scalding! When washing at high ■ Electrical safety temperatures, you may be S a f e t y i n s t r u c t i o n s scalded if you touch the hot Warning washing water (e.g. -
Page 6: Protection Of The Environment
Protection of the environment Warning Protection of the Risk of choking! environment Children may become wrapped in packaging/film or packing parts if Packaging/old appliance allowed to play with them, or they P r o t e c t i o n o f t h e e n v i r o n m e n t may pull them over their heads and suffocate. -
Page 7: The Main Points In Brief
The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Plug into the mains. Open the washer Select the washing/ Max. -
Page 8: Getting To Know Your Appliance
Getting to know your appliance Getting to know your appliance Washer dryer G e t t i n g t o k n o w y o u r a p p l i a n c e Hot air outlet Operating/display panel Door with handle Open the door... -
Page 9: Control Panel
Getting to know your appliance Control panel Change the default settings for the selected 8 Select buttons Option and Select for programme and select additional functions: additional functions.~ Page 26 @ Start programme. Select the Start/Reload ( Select a programme. Can be rotated in either button to start, interrupt (e.g. -
Page 10: Display Panel
Getting to know your appliance Display panel Displays for the programme (: Temperature for washing Ž (cold) – 90° Temperature in °C programme 0: Spin speed for washing $ –1400 Spin speed in revolutions per minute; programme $ (Rinse stop = without final drain/spin cycle, laundry remains in the water after the last rinse cycle) See details ~ Page 26... - Page 11 Getting to know your appliance Childproof lock w lights up On if childproof lock has been activated ~ Page 18 w flashes The childproof lock is actived, and if the pro- gramme selector has been adjusted or the buttons have been pressed Drying On if drying programme is selected è...
-
Page 12: Laundry
Laundry An especially gentle washing Laundry process is required; e.g. Delicates/Silk programme P reparing laundry for washing Suitable for washing by hand; L a u n d r y e.g. W Wool program Sorting laundry according to: Do not machine wash. Ž... -
Page 13: Preparing Laundry For Drying
Laundry Ensure that underwired bras are Notes ■ appliance-washable. Before drying, hand-washed textiles ■ Wash delicates in a net or bag must be spun at the appropriate spin ■ (tights, underwired bras, etc). speed. Close zips, button up covers. Before drying, spin at the optimum ■... -
Page 14: Operating The Appliance
Operating the appliance Selecting the programme/ Operating the Switching on the appliance appliance Note: Preparing the washer dryer If you have activated the childproof lock, O p e r a t i n g t h e a p p l i a n c e you must deactivate it before you can The washer dryer was tested before set a programme. -
Page 15: Adjusting The Drying Programme
Operating the appliance The buttons are sensitive, they only Adjusting the drying ■ need to be touched gently. If the programme button Temp.°C, Spin speed, Start delay time is held down, the setting Note: options are automatically scrolled If an individual drying programme or through. -
Page 16: Loading The Laundry
Operating the appliance Loading the laundry Dosing and adding detergent and care product Warning Danger of death! Caution! Laundry items pretreated with solvent- Damage to the appliance based detergents, e.g. stain remover/ Detergents and agents for the petroleum ether, may cause an pretreatment of laundry (e.g. -
Page 17: Starting The Programme
Operating the appliance Pour in detergent and/or cleaning product. Do not use the measuring aid for Note: gel detergents and washing powder, or for programmes with prewash or when Dispenser I Detergent for prewash. "Start delay" time is selected. Dispenser i Softener, starch. Do not exceed For models without a measuring aid, the maximum load. -
Page 18: Childproof Lock
Operating the appliance Childproof lock Notes If there is a high water level, high ■ You can secure the washer dryer to temperature or if the drum is prevent the set functions from being rotating, the door remains locked changed inadvertently. To do this, for safety reasons and reloading is activate the childproof lock when the not possible. -
Page 19: End Of The Programme
Operating the appliance For drying programmes: After washing/drying Select Intensive Dry or Gentle Dry. Open the door and remove the Touch button Dry, and set drying laundry. time to 15 minutes. Turn the programme selector to Select Start/Reload. $ Off. The appliance is switched off. Turn off the tap. -
Page 20: Overview Of Programmes
Overview of programmes Overview of programmes Programme on the programme O v e r v i e w o f p r o g r a m m e s selector Programme/Type of washing Options/Information Name of the programme maximum load according to EN50229 Brief explanation of the programme and which textiles it is suitable for. - Page 21 Overview of programmes Programme/Type of washing Options/Information h Wool max. 2.0 kg Hand and machine-washable fabrics made of wool or wool blend; Ž (cold) – 40 °C particularly gentle wash programme to prevent shrinkage of laun- $ – 800 rpm dry, with longer programme breaks (soaking garments in the deter- gent solution).
- Page 22 Overview of programmes Programme/Type of washing Options/Information Outdoor+ max. 1.0 kg/1.0 kg Weatherproof and outdoor clothing with membrane coating and Ž (cold) – 40 °C water-resistant textiles. 400 – 800 rpm G, ¦, Ã, l Aut 1 Fluff/Drum Clean – Special program for drum hygiene or fluff removal.
-
Page 23: Drying Table
Overview of programmes Drying table Cottons/coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels) Dry weight in kg 0,5 ~1,0 1,0 ~ 2,0 2,0 ~ 3,0 3,0 ~ 4,0 ~ 0,5 ~ 1,0 ~ 2,0 ~ 2,5 Estimated drying time in min Adjustable drying time in min Aut1 <60... -
Page 24: Starching
Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. You can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 25: Dry
Changing programme default settings Maximum spin speed for the washing programme will be selected 8: The drying function can be automatically to obtain a good activated, deactivated and set with this drying result. button. Washing and drying without interruption is possible in automatic Start delay mode only. -
Page 26: Selecting Additional Functions
Selecting additional functions z (Water Plus) Selecting additional Increased water level and extended functions wash time. For areas with very soft water or for further enhancing the Select the desired additional functions washing result. S e l e c t i n g a d d i t i o n a l f u n c t i o n s Option button, keep on touching the button until the indicator light of your l (Rinse plus) -
Page 27: Setting The Signal
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate setting mode for the signal volume Turn to $ Off. Turn one position Press and hold Temp.°C button Release the button, figure clockwise. -
Page 28: Cleaning And Maintenance
Cleaning and maintenance Drum Cleaning and Use chlorine-free cleaning agents, do maintenance not use steel wool. Warning Descaling C l e a n i n g a n d m a i n t e n a n c e Risk of electric shock! Danger of death if live parts are Not required if detergent dosed... -
Page 29: Drain Pump Blocked
Cleaning and maintenance Drain pump blocked Reinsert and screw on the pump cover. Handle should be vertical. Warning Risk of scalding! Washing water is hot when washing at high temperatures. You may be scalded if you touch the hot washing water. Allow the washing water to cool down. -
Page 30: Filter In The Water Inlet Hose Blocked
Cleaning and maintenance Filter in the water inlet hose Air filter blocked blocked Turn the programme selector to $ Off. Pull out the mains plug. Warning Open and remove the service flap. Danger of death! Take out the air filter. Do not immerse the Aqua-Stop safety device in water (it contains an electric valve). -
Page 31: Faults And What To Do About Them
Faults and what to do about them Caution! Faults and what to do Water damage about them Leaking water may cause damage. Do not open the door if you can still see Emergency release, e.g. if a water through the glass. F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs Turn the programme selector to $... -
Page 32: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy The door cannot be opened after the drying programme due to the high tempera- ture. The cooling process continues until the display disappears, after which the door can be opened. Flashes (no water supply): Tap turned on? Water inlet filter blocked? Clean ■... - Page 33 Faults and what to do about them Faults Cause/Remedy Spin result not satisfac- Not a fault – unbalanced load detection system has stopped the spin ■ tory. cycle, washing unevenly distributed. Distribute small and large items of washing in the drum. Laundry wet/too damp.
- Page 34 Faults and what to do about them Faults Cause/Remedy Drying duration extended. According to the air cooling principle, a higher ambient temperature will ■ result in poor drying performance, so the drying time will be extended. Ensure good ventilation to allow surplus heat to escape. Air filter blocked? Clean the air filter ■...
-
Page 35: Customer Service
Customer service Customer service Technical specifications If you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do about them ~ Page 32 T e c h n i c a l s p e c i f i c a t i o n s Dimensions 60 x 59 x 84,5 cm... -
Page 36: Consumption Values
Consumption values Consumption values C o n s u m p t i o n v a l u e s Energy Water Programme Load Programme Option consumption *** Consumption *** duration *** (kg) (kWh) (liter) (min) Cottons 20 °C 0,25 Cottons 30 °C 0,35... -
Page 37: Installation And Connection
Installation and connection @ Water drain hose Installation and H Elbow for securing the water connection drain hose* P Water supply hose on standard/ Aqua-Secure models Standard accessories I n s t a l l a t i o n a n d c o n n e c t i o n depending on the model Check the washer dryer for Note:... -
Page 38: Installation Area
Installation and connection When lifting the washer dryer by its Installing the appliance under/ ■ projecting parts (e.g. washer dryer between kitchen units door), the parts may break off and cause injuries. Warning Do not lift the washer dryer by its Risk of electric shock! projecting parts. -
Page 39: Removing The Transportation Protection Devices
Installation and connection Removing the transportation protection devices Caution! Damage to the appliance Before using the washer dryer for the ■ first time, it is essential to remove all Insert the covers. Lock firmly by 4 transportation protection devices. pressing on the locking hook. Insert Keep the transportation protection the hose holder. -
Page 40: Connecting The Water
Installation and connection If the hose holders are used, the Water supply Note: possible hose lengths are reduced! Notes Available from dealer/customer Do not kink, crush, alter or cut ■ service: through the water supply hose Extension for Aqua-Stop or cold ■... -
Page 41: Water Drainage
Installation and connection Carefully turn on the tap and check and damage the washer dryer and/or that the connection points are not textiles. leaking. Ensure that: the sealing plug does not block the ■ outflow of the washbasin. the water drains quickly enough. ■... -
Page 42: Alignment
Installation and connection Alignment Electrical connection Loosen the lock nut in a clockwise Electrical safety direction with a wrench. Check the alignment of the washer Warning dryer with a spirit level and, if Risk of electric shock! required, correct. Adjust the height Risk of death if live parts are touched. -
Page 43: Before Washing/Drying For The First Time
Installation and connection Before washing/drying for the Transportation first time Preparatory work Turn off the tap. The washer dryer was inspected Release the water pressure in the thoroughly before leaving the factory. To supply hose. remove any residual test water, run the Filter in the water inlet hose blocked Fluff/Drum Clean 40°C programme the ~ Page 30... - Page 44 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001168797* 9001168797 (9610)