How To Install - Black & Decker LEDUC9-1CCT-ACK User Manual

How to Install

1. Mount control box in desired location
5. Connect the AC adapter cord to the control box
9
2. Slide two bar mounting clips onto each light bar
6. Route and hide wires as desired using wire clips and/or
zip ties (See Routing Wires Section PG. 7)
3. Using the provided mounting spacer, mount bar lights
and hold in place for 10 seconds
7. Plug in your AC adapter to the power source
4. Using jumper wires, connect the control box to the first
light bar(s) and light bars to each other.
See Routing Jumpers Wires section for tips (PG. 7)
For troubleshooting and support, scan
code or visit PureOpticsLED.com/Support.
10