Protecting The Hp Ipaq Screen From Cracking Or Damage - HP iPAQ hw6900 Product Information Manual

Using MapQuest to Look Up a GPS-Tagged Image
Use HP Photosmart Mobile and MapQuest to "look up" the location of your
tagged images. To "look up" your images:
1. Connect to the Internet.
2. Tap Start > Programs >Photosmart Mobile.
3. In the Browse mode, select a tagged-GPS .jpg image.
4. Tap Menu > Tools > Look up on Mapquest.
The location where the photo was taken appears on a map.
5. When you are finished viewing the map, tap
When .jpg thumbnail images are embedded with GPS information, the GPS icon
appears on them. (Only .jpg images can be tagged with GPS information.)
Protecting the HP iPAQ Screen from Cracking or
Damage
CAUTION The screen of your HP iPAQ is made of glass and can be damaged
or broken by drops, impacts, or pressure.
To reduce the risk of damage to the internal components, do not spray liquid
directly on the screen, or allow excess liquid to drip inside your HP iPAQ. Using
soap or other cleaning products on the screen might discolor the finish and
damage it.
• HP is not responsible for damage that occurs as a result of your failure to
follow the instructions that came with the HP branded product. Refer to the
warranty document included with your HP iPAQ for more information.
• You should observe the following practices to protect the screen of your
HP iPAQ from damage:
• Do not sit on your HP iPAQ.
• When transporting your HP iPAQ in a purse, pocket, briefcase, etc.,
ensure the device does not get compressed, bent, dropped, or hit.
• When not in use, close the flip cover on your HP iPAQ and store it in a
case. You can select from a wide variety of case options at
www.hp.com/accessories/ipaq
• Do not place anything on top of your HP iPAQ.
• Do not bang your HP iPAQ against hard objects.
.
or www.casesonline.com.
50