HP xp8010 series Reference page 11

RS-232 keyword listing
Keyword Parameters
Video functions
CSPC 0 to 2, ?
PMOD 0 to 2, ?
WHIT 0 to 10, +, –, ?
BRT 0 to 100, +, –, ?
CON 0 to 100, +, –, ?
SAT 0 to 100, +, –, ?
TNT 0 to 100, +, –, ?
CTMP 0 to 2, ?
SHRP 0 to 12, +, –, ?
KEYV –50 to 50, +, –, ?
RS-232 protocol reference
(continued)
Description
Sets or queries the active color space:
0 = RGB, 1 = YPbPr, 2 = YCbCr
Note: The active input source must be analog RGBHV
interlaced, analog RGBHV progressive, or component
progressive.
Sets or queries the picture mode:
• 0 = business graphics mode
• 1 = theatre video mode
• 2 = super-bright mode
Note: The notification sent in response to a request using
PMOD indicates the current picture mode, not the
requested picture mode. It can take up to 15 seconds for
the requested mode to take effect. Once it does, a second
notification is sent indicating that the requested picture
mode is active.
Sets or queries the white intensity.
Note: PMOD must be set to 0 or 1.
Sets or queries the brightness.
Sets or queries the contrast.
Sets or queries the color saturation.
Sets or queries the tint.
Sets or queries the color temperature:
0 = warm, 1 = neutral, 2 = cool
Sets or queries the sharpness.
Sets or queries the vertical keystone:
• 0 = no keystone adjustment.
• 1 to 50: shrinks the top of the display.
• –1 to –50: shrinks the bottom of the display.
11