Table of Contents
Advertisement
HDMI
The connected HDMI device
does not display any
picture.
The connected HDMI device
does not output sounds.
Resetting the recorder
If you observe any of the
following symptoms.
You can reset the recorder
as follows.
Customer Support
You can update this recorder using the latest software to enhance the products operation and/or add new features.
To obtain the latest software for this recorder (if updates have been made), please visit http://lgservice.com or contact
LG Electronics customer care center.
b Try disconnecting then reconnecting the HDMI cable.
b Try switching the power of the HDMI device off then back on.
b The video input of the connected device is set correctly for this recorder.
b The HDMI cable you are using is fully HDMI-compliant.
Using a non-standard cable may result in no picture being output.
b Not all HDCP-compatible DVI devices will work with this recorder.
b Some HDMI-compatible devices do not output sounds
Check the manual that came with the connected device.
b If your TV is not capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option
to [48 kHz] on the setup menu. When this choice is made, this recorder will automatically convert
any 96 kHz signals to 48 kHz so your system can decode them.
b If your TV is not equipped with Dolby Digital, DTS and MPEG decoder, set the [Digital Output]
option to [HDMI LPCM]on the setup menu.
b The recorder is plugged in, but the power will not turn on or off.
b The front panel display is not working.
b The recorder is not operating normally.
b Press RESET button on the front pannel.
This will force the recorder to power off then turn the recorder back on.
b Unplug the power cord, wait at least five seconds, and then plug it in again.
56
Advertisement
Table of Contents
