LG MS409D Manual page 18

Wireless network setting (peer to peer)
If you do not have a wireless network device at your
home, you can connect directly to the wireless network
equipped computer using [Peer to Peer (Ad Hoc)]
setting.
For this connection, features which require internet
connection such as YouTube, Picasa web albums cannot
be operated.
Preparation:
Before setting the peer to peer connection, you need
to:
– connect the wireless LAN adapter on the USB
port.
– prepare the wireless network equipped computer.
1
Follow the steps 1-5 from "Wireless network setting
(Infrastructure)" on page 17.
2
Use v/V to select the [Peer to Peer (Ad Hoc)], and
press OK.
3
Use v/V to select the [Wireless SSID], and press OK
to display the virtual keyboard.
Select [Alphabet Capital], [Alphabet Small] or
[Symbol], and press OK to change the character set
of the virtual keyboard.
[Space]: Inserts a space at the cursor position.
[Delete]: Delete a previous character at the cursor
position.
[T t]: Moves cursor to the left or right.
[OK]: Complete inputting SSID.
[Cancel]: Cancels the naming, and return to the
previous.
4
If you want to set the security, use v/V to select the
[Shared key (WEP)], and press OK to display the
virtual keyboard.
Refer to step 3 above for using virtual keyboard.
If you do not want to set the security for the wire-
less connection, select the [Open System], and
press OK.
5
Use v/V to select the [Host IP] field, and input the IP
address using numerical buttons.
Using default IP address is recommended.
6
Press yellow coloured button to complete the [Ad-Hoc
Setup] settings.
7
Check the network information, and press OK to finish
the network setup.
8
On your computer, the SSID you have set can be
found on the wireless network list.
Please refer to the documentation for your comput-
er or operating system for further instructions.
There may be various ways to get Ad-Hoc connection
to your computer depending on the operating system,
wireless network application,
18