HP jetdirect 175x Administrator's Manual page 122

Table 4.4 TCP/IP Settings (3 of 3)
Item
System Contact
System Location
Banner Page
Default IP
Send DHCP
requests
IPX/SPX
The IPX/SPX tab allows you to configure IPX/SPX (Internet
Packet Exchange/Sequenced Packet Exchange) parameters on the
HP Jetdirect print server for operation on a Novell NetWare or
IPX/SPX-compatible network (such as a Microsoft network).
See Table 4.5 for a description of items on this page.
ENWW
Description
Identifies a person who is assigned to administer or service this
device. This field may include a phone number or similar
information.
When configured, this parameter will be displayed on the
HP Jetdirect home page.
Specifies the physical location of the device or related
information. Only printable ASCII characters are allowed, up to 64
characters.
When configured, this parameter will be displayed on the
HP Jetdirect home page.
Specifies whether to enable or disable printing of an LPD banner
page for print jobs. For HP Jetdirect external print servers that
provide multiple ports, you can configure each port. For internal
print servers, only a single port is available (Port 1).
Specifies the IP address to use when the print server is unable
to obtain an IP address from the network during a forced TCP/IP
reconfiguration (for example, when manually configured to use
BOOTP/DHCP).
DEFAULT_IP: sets the legacy default IP address 192.0.0.192.
AUTO_IP: sets a link-local IP address 169.254.x.x.
The initial setting is determined by the IP address obtained when
first powered on.
A checkbox is used to specify whether DHCP requests will be
periodically transmitted when a legacy default IP address
192.0.0.192 or link-local IP address 169.254.x.x has been
automatically assigned.
Clear the checkbox to disable DHCP requests.
Check the checkbox (default) to enable DHCP requests.
Using the Embedded Web Server 122