Power Requirements for the Cisco TelePresence 3000
Figure 8-9
Cabling the Speakers
Tip
Before plugging cables into the Codec, label each one. For example, Left Speaker, Center Speaker.
Step 10
Connect the following cables:
•
•
•
•
Cisco TelePresence System 3000
8-12
Attach and route the power cables for the lighting assembly by connecting the lights to the auxiliary
control unit.
Connect the DSUB to 8-P MINI DIN cable between the projector and the auxiliary control unit.
Connect the Ethernet cables between the codec and the auxiliary control unit.
Connect the power cord for the auxiliary control unit to a wall outlet.
2
Signal
Chapter 8
Routing Power and Signal Cables
OL-14521-01