Toshiba VF-S15 Instruction Manual page 2

VF-S15 Option Adapter
Instruction Manual
1. Make sure that this instruction manual is delivered to the end user of option
adapter.
2. Read this manual before installing the option adapter. Keep it in a safe
place for reference.
3. All information contained in this manual will be changed without notice.
Please contact your Toshiba distributor to confirm the latest information.
Safety Precautions
There is important information on the inverter and in its instruction manual for proper use
of the device to prevent injury to users or damage to property.
Read the instruction manual attached to the inverter to understand the safety
precautions, the symbols and indications completely.
Please observe the contents of these manuals at all times.
For detailed functions and operation of this unit, please refer to the inverter's instruction
manual (E6582175).
Limitation of use
 Never use the option with any device other than VF-S15 inverter.
This will result in accident.
Prohibited
Handling in general
 Never disassemble, modify or repair the option.
This can result in electric shock, fire or injury.
Disassembly
For repairs, call your Toshiba distributor.
prohibited
 Do not put or insert any kind of objects into the option (electrical wire
cuttings, rods, wires etc).
This can result in electric shock or fire.
 Do not splash water or any other fluid over the option, do not touch the
option with wet hands.
This can result in electric shock or fire.
Prohibited
 Do not apply shock (falling, etc.) on the option.
This can result in damage or malfunction.
 Do not touch the connector to inverter (refer to the outline drawing).
This can result in malfunction.
 Turn off the power immediately in case of abnormalities such as smoke,
abnormal odor, noise.
Neglect of these conditions can result in fire.
Mandatory
For repairs, call your Toshiba distributor.
action
 Operate under the environmental conditions prescribed in this manual.
Operations under any other condition can result in malfunction.
Disposal
 If you dispose of the option, have it done by a specialist in industrial waste
disposal*.
Improper disposal can lead to produce noxious gases resulting in
accident.
(*) Persons who specialize in the processing of waste and known as
"Industrial Waste Product Collectors and Transporters" or "Industrial Waste
Prohibited
Disposal Persons." If the collection, transport and disposal of industrial
waste are done by someone who is not licensed for that job, it is a
punishable violation of the law (Laws in regard to cleaning and processing
of waste materials).
Wiring･Installation
 Do not use the option if it is damaged or any part of it is missing.
Operating the defective product can result in electric shock or fire.
For repairs, call your Toshiba distributor.
 Do not connect any communication device other than applicable
communication options to the option adapter.
Prohibited
This can result in malfunction or accident.
 Do not pull the cable and the connector connected to the option.
This can result in damage or malfunction.
 The following steps must be performed before wiring and installation.
Turn off all input power, wait at least 15 minutes, and confirm that the
Mandatory
charge lamp of inverter is no longer lit.
action
If steps above are not properly performed, this can result in electric shock.
 Ground must be connected securely.
If the ground is not securely connected, it could lead to malfunction.
Be Grounded
Accessories
Option adapter is shipped together with the following accessories.
(1) User's manual...............1 copy
(2) DANGER label kit..........1 sheet
(3) Grounding wire..............1 pcs
Product Specification
Item
Type form SBP009Z
Applicable model VF-S15
Applicable option Please refer to VF-S15 instruction manual (E6581611).
Operation Environment In accordance with VF-S15
IP20 with communication option mounted and option
Protection(IP code)
adapter mounted to inverter
580, Horikawa-cho, Saiwai-ku, Kawasaki, Kanagawa 212-0013, Japan
TEL: +81-44-520-0828 / FAX: +81-44-520-0508,
https://www.toshiba-tips.co.jp/en/contact/eu.html
Notice
Warning
Warning
Caution
Warning
Manual
Specification
Mounting, wiring and removing
 The mounting/removing of option must be performed without supplying
power(Turn off all input power, wait at least 15 minutes, confirm that the
charge lamp of inverter is no longer lit). The inverter and option can
Mandatory
become damaged.
action
 Do not use tool for the mounting/removing of option . The inverter and
option can become damaged.
After mounting option adapter, the depth of inverter is increased by 25.5mm.
Mounting of option
* 3PH-200V 0.75kW inverter is shown in the picture.
Option
adapter ① Insert option into option adapter.
*Note.:
Option
Option
connector
cover
②Remove the option
③Lock the control
connector cover on control
terminal cover.
terminal cover.
Grounding wire wiring
Grounding terminal of option adapter
Recommended tightening torque: 0.5 N・m
Connect attached grounding wire to grounding
terminal of inverter.
Grounding terminal of inverter
Removing of option
Remove the connector
in the direction of arrow
while pushing the
release tab.
Tab
for release
Warranty
■Warranty period
This product's warranty period is 12 months after the purchase, or 18 months from the
manufacture, whichever precedes the other.
The warranty period of repaired products will not exceed the warranty period before the
repair takes place.
■Scope of warranty
If a product failure is found during the warranty period due to our negligence, please
return the product to Toshiba distributor of purchase, for a replacement or repair of the
defective component.
The warranty shall only cover the purchased or delivered product itself.
The following circumstances will incur paid service even before the warranty period expires.
- Product replacement or repair when the product is not returned.
- Product failure or damage due to misuse, inappropriate repair or modification of the product.
- Product failure or damage for reasons such as but not limited to a fall after purchase,
an accident during transport, or handling (e.g. smoking) during transport.
- Product failure or damage by natural disasters or unforeseeable external causes such
as but not limited to fire, salt exposure, gas exposure, earthquakes, storms, floods,
lightning and abnormal voltage.
- Product failure or damage by use under inappropriate circumstances, environments or
use not suggested in the product catalog or instruction manual, or use not complying
with the original use intended for the product.
- Product failure or damage by the lack of proper maintenance or replacement of expiring
parts suggested in the instruction manual.
- In case the product is embedded in your equipment, product failure or damage by
causes irrelevant to the product, such as the design of your equipment and software.
- In case the product is embedded in your equipment, product failure that could have
been avoided if your equipment had featured a safety device in compliance with the
law that governs your equipment, or any feature or structure that is considered the
norm by the industry standard.
- Any product failure or damage by accidents that were unforeseeable with the
technological standard at shipment.
■Warranty exemptions
Irrespective of the warranty period, the warranty shall not cover the following conditions.
- Compensation for any damage not attributed to our negligence.
- Compensation for any loss of business opportunity or income caused by failure of the product.
- All liabilities and compensations for any damage, secondary damage, accidents,
damage to any entity that is not the product and damage to any other operations that
arise from special circumstances, that we may or may not foresee.
- Any compensations for the results of your product replacement, readjustment of the
local equipment after replacement, launch test, inspections, or any other operations.
■Service after the stop production
Please ask Toshiba distributor of purchase about the stop of production and repair work
for each product.
E6581838④
Warning
Mount option adapter to inverter after option insertion.
Insert the option straightly and slowly along the guide
inside option adapter. Follow this instruction,
the connecter can become damaged.
Hook
④Hang the hook of option adapter
on the control terminal cover.
Insert the connector in the
direction of arrow
Remove an option in the
direction of arrow while
Tab pushing the release tab in
for release the lower direction.
© Toshiba Schneider Inverter Corporation 2012