Cisco NSS2000 Series Getting Started Manual page 19

Configuring the Network Storage System (NSS)
Step 4 — Save the Current Configuration
STEP 3
STEP 4
STEP 5
STEP 6
NSS2000 Getting Started Guide
The Configuration Manager page appears.
Select the location where the backup is saved from the Stored Configuration
Location drop-down menu. To save the configuration file to a USB flash device,
select the AUX-1 port as the location. You can then copy the configuration file from
the USB flash device to another location on your network.
Click Update.
Click Save to save the configuration settings. If the configuration file does not
successfully save to the specified volume, check the volume to ensure that it is not
locked.
If you saved the file to the USB flash device, display the Storage Status page.
3
15