Specific Code Handling; Unit Not Turning On - Siemens MULTIMOBIL 2.5 Troubleshooting Manual

2 1 I > Iheiz
2 2 Maximum Preparation
Time

7.19 Specific CODE Handling

7.19.1 Unit not turning ON

Siemens Ltd. Med India
This CODE is displayed if the filament current exceeds 4.1V in prepation
state.
This CODE is displayed if First step is pressed for more than 15 sec.
Version 6.0
Copyright © SIEMENS LTD. All rights reserved. For internal use only
Service Manual
Service Instructions
7-13