Table of Contents
Advertisement
SERVICE MANUAL
Ver 1.8 2003.12
• HCD-DP1000D is the tuner, deck,
DVD and amplifier section in MHC-
DP1000D.
AUDIO POWER SPECIFICATIONS:
(USA model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
with 8 ohm loads both channels driven, from
120 Hz – 10 kHz; rates 100 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Continuous RMS power output
Center speaker:
30 watts
Rear speakers:
30 + 30 watts
(8 ohms at 1 kHz, 10% THD)
Amplifier section
Canadian model:
Continuous RMS power output (reference)
Front speaker:
100 + 100 watts
Center speaker:
30 watts
Rear speakers:
30 + 30 watts
(8 ohms at 1 kHz, 10% THD)
Total harmonic distortion less than 0.07%
(8 ohms at 1 kHz, 70 W)
European model:
DIN power output (rated) 60 + 60 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
80 + 80 watts
Center speaker:
30 watts
Rear speakers:
30 + 30 watts
(8 ohms at 1 kHz, 10% THD)
Sony Corporation
9-873-314-09
Home Audio Company
2003L02-1
Published by Sony Engineering Corporation
© 2003.12
HCD-DP1000D
PHOTO :E model
Model Name Using Similar Mechanism
DVD
DVD Mechanism Type
Section
Base Unit Name
Optical Pick-up Name
Tape deck
Model Name Using Similar Mechanism
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Music power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Other models:
The following measured at AC 120, 220, 240 V,
50/60 Hz
DIN power output (rated) 90 + 90 watts
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Inputs
GAME IN:
(phono jacks)
MD (VIDEO) IN:
(phono jacks)
OPTICAL IN:
(Square optical connector jacks, front panel)
wavelength
MIC:
(Except for North
American and
European models)
(phone jack)
MINI HI-FI COMPONENT SYSTEM
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
NEW
CDM58D-DVBU9
DVBU9
KHM-240AAA/CLNP
HCD-DP800AV
TCM-230AWR41/MWR41
150 + 150 watts
60 watts
60 + 60 watts
(8 ohms at 1 kHz, 10% THD)
(8 ohms at 1 kHz, DIN)
120 + 120 watts
40 watts
40 + 40 watts
(8 ohms at 1 kHz, 10% THD)
voltage 250 mV,
impedance 47 kilohms
voltage 450 mV/250 mV,
impedance 47 kilohms
——
sensitivity 1 mV,
impedance 10 kilohms
— Continued on next page —
Advertisement
Table of Contents
