Page 1
PERFEKT GLIDE 36-REC 36” Built-in Telescopic Range Hood...
Page 2
• Quiet (7 sones/56dB) 300 CFM motor ELECTRICAL REQUIREMENTS • 115 Volt, 60Hz, 15AMP • AEG Range Hoods are supplied with a Canadian cord and plug • 5/16 Electrical cord located 6 ” (160mm) from the top right corner of the unit at the rear Specifications are subject to change without notice V1.2...
Specifications PERFEKT GLIDE 36-REC FRONT PANEL - DUCTED RANGE HOOD DIMENSIONS D: 11” x W: 35 ” D: 280mm x W: 898mm Specifications are subject to change without notice V1.2...
Specifications PERFEKT GLIDE 36-REC FRONT PANEL INSTALLATION NOTE: Removing the front stainless steel trim • 1. Pull the glide forward • 2. Remove the 4 screws holding the glide to the panel • 3. Install the matching front panel using the 4 screws...
Page 6
Specifications PERFEKT GLIDE 36-REC NOTE: Cabinet Door Panel Height • Ensure that the cabinet door panel is shortened to accommodate the larger sized Range Hood Front Panel Specifications are subject to change without notice V1.2...
Page 7
Specifications PERFEKT GLIDE 36-REC RECOMMENDED CABINET MINIMUM CLEARANCE (GAS COOKING SURFACE) 7/16 ” 900mm Specifications are subject to change without notice V1.2...
Page 8
Specifications PERFEKT GLIDE 36-REC RECOMMENDED CABINET MINIMUM CLEARANCE (ELECTRIC / INDUCTION COOKING SURFACE) 7/16 ” 900mm 24” (610mm) Specifications are subject to change without notice V1.2...
Page 9
AEG Appliances are designed and manufactured to the highest standards. Each appliance is covered by a comprehensive 2-year parts and labour warranty. Refer to product warranty policy for complete terms and conditions. FOR PARTS AND SERVICE Euro-Parts & Service 39822 Belgrave Road, Belgrave, ON. N0G 1E0 1 800 678 8352 (Canada) •...