Parking Brake; Brake Light Switch Adjustment; Cable Inspection And Lubrication - Yamaha WOLVERINE YXE70WPXH Owner's Manual

EBU33710

Parking brake

Pull the parking brake lever rearward com-
pletely. If the parking brake lever clicks eight
times or more, have a Yamaha dealer adjust
the parking brake because the braking force
of the parking brake is weak. In addition, have
a Yamaha dealer check and adjust the park-
ing brake at the intervals specified in the peri-
odic maintenance and lubrication chart.
EBU32550

Brake light switch adjustment

The brake light switch, which is activated by
the brake pedal, is properly adjusted when
8
the brake light comes on just before braking
takes effect. If necessary, adjust the brake
light switch as follows.
Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in di-
rection (a). To make the brake light come on
later, turn the adjusting nut in direction (b).
1. Brake light switch
2. Adjusting nut
EBU35930

Cable inspection and lubrication

EWB03380
WARNING
Damaged cables could restrict operation,
which may cause an accident or injury. In-
spect control cables frequently and re-
place damaged cables. Corrosion can
result when the outer covering of control
cables becomes damaged. Cables can
also become frayed or kinked.
8-42
1 2
(b)
(a)