Advertisement
English
3
2
1
'Unplug for use' symbol
1
Make sure that the appliance is switched off.
2 Insert the small plug into the appliance.
3 Put the USB plug in the supply unit supplied
and put the supply unit in the wall socket.
-
While the appliance is in quick charge
mode, the lights of the battery status
indicator light up one after the other.
After approximately 5 minutes, the
bottom light of the battery status
indicator flashes. The battery now
contains enough energy for one full
shave.
-
While the appliance charges, first the
bottom light of the battery status
indicator flashes and then lights up
continuously. Next the second light
flashes and then lights up continuously,
and so on until the appliance is fully
charged.
-
When the appliance is fully charged, all
three battery indicator lights light up
continuously. After approx. 30 minutes,
the light goes out automatically.
4 After charging, remove the supply unit from
the wall socket and pull the small plug out of
the appliance.
The 'unplug for use' symbol flashes to remind
you to disconnect the appliance from the wall
socket and remove the small plug from the
appliance before you switch it on.
33
Advertisement
