Enabling the GSM Radio
Be default, the GSM radio should be enabled after each
Hard Reset (Cold Boot)
(see page 3-25). Verify
the status of the radio in the Dolphin Wireless Manager.
1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager
.
2. Tap anywhere inside the Phone rectangle and Phone begins activating.
3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON and the
Phone section displays additional information about the GSM radio.
8 - 4
Rev A
Dolphin® 7600 Mobile Computer
5/23/2008
User's Guide