Sony HKCA-700 Operation Manual page 41

3
Lift the camera, insert it from
the rear of the HKCA-700, and
mount it on the tripod
attachment, as shown in the
figure.
Return the viewfinder mount
moved in step 2 to its normal
position, and tighten the two
screws.
Caution
• Do not put your fingers in the
space between the HKCA-
700 and the viewfinder
mount.
• Make sure to fully tighten the
viewfinder mount lock
screws.
4
Connect the lens cable to the
LENS connector on the
camera.
5
Loosen the lock lever and push
the camera slowly forward
toward the lens.
Viewfinder mount
HKCA-700
Lock lever
Lock screws
Tripod attachment
Lens cable
LENS connector
(Continued)
15(E)